Search
Vous êtes ici :

Clinical procedure

1- Temporary bridge, trimmed and polished – try in

2-Injection of the cement in the temporary bridge

3-Cementation of the temporary bridge.

4-Temporary bridge trimmed, cemented, occlusion checked.

Dual syringe form

  1. Before first use, take the cap off and check that the two exits are unblocked.
  2. xtrude a little bit of cement to be sure that the 2 parts equally flow. Put a mixing tip on.
  3. Extrude the desired quantities and apply a thin layer in the intrados of the temporary crown.
  4. The crown or bridge should be firmly hold in place, by asking the patient to bite.
  5. Eliminate the excess immediately by spreading them on the temporary crown, with a mouth spatula, to obtain a smooth joint. The cement is totally hard after 1minute
    Check the occlusion with an articulating paper.
  6. Leave the mixing tip in place until the next use.

 

2 syringes: 12,5 g

  1. Take the caps off and extrude the desired equal quantities of base and catalyst, from the 2 syringes onto a mixing pad. Put the caps back in place.
  2. Mix the 2 pastes with a mouth spatula (10 s.) and apply a thin layer of cement in the intrados of the temporary crown.
  3. The crown or bridge should be firmly hold in place, by asking the patient to bite.
  4. Eliminate the excess immediately by spreading them on the temporary crown, with a mouth spatula, to obtain a smooth joint. The cement is totally hard after 1 minute
  5. Check the occlusion with an articulating paper.

L'accès au site www.elsodent.com est strictement réservé aux professionnels de la santé bucco-dentaire.

Espace réservé aux professionnels de santé

Bienvenue sur notre site. En application de la loi relative au renforcement de la sécurité sanitaire des produits de santé, cet espace est exclusivement réservé aux professionnels de santé. En cliquant OUI, vous certifiez être un professionnel de la santé bucco-dentaire et être ainsi autorisé à accéder à cet espace.